Giasco EDISON SB FO E P CI HI WRU HRO Safety Shoes

Giasco EDISON SB FO E P CI HI WRU HRO safety shoes are high safety shoes made of WPA leather with a scratch-resistant leather heel, 1.8–2.0 mm thick, with a reflective insert. Lining made of breathable and abrasion-resistant fabric. Soft, padded and coated tongue.

FOOTWEAR COMPLETELY FREE OF METAL PARTS

Polymer composite protective toe cap, non-metallic, 200 J impact resistance, in accordance with EN 22568.

PS flexible non-metallic composite midsole with insulating fabric, puncture-resistant, in accordance with EN 22568.

HARD ROCK INSULATING two-density sole, made of polyurethane and insulating rubber, resistant to hydrocarbons and abrasion, shock-absorbing and providing slip resistance.

Model HRD060D was tested using a method analogous to ASTM F2413-24 (EH) and CSA Z195-14 for electric shock resistance, with a voltage rise of 1 kV/s to 20,000 V / 60 Hz with voltage retention for 1 minute. The electric current remained below 1.0 mA.

The sole of the footwear, under defined conditions (in the absence of moisture, without reference to the upper), has been tested using a method analogous to EN ISO 20345:2022 and provides electrical insulation up to 1000 V (MΩ > 1000). (Test Report No. 4351088/E)

Dielectric cartridge, double-layer for extra comfort with activated carbon, breathable, detachable, anatomically shaped, absorbent, insulating and antibacterial.

Environmentally friendly product.

FO – Hydrocarbon-resistant outsole
E – energy absorption in the heel area
PS – puncture resistance of the non-metallic midsole (nail Ø 3.0 mm)
CI – insulation against cold down to -17 °C
HI – sole heat insulation
HRO – sole resistance to hot contact
SR – sole with slip resistance.

This product meets the requirements of ASTM F2413-24:
impact resistance (I)
pressure resistance (C)
puncture resistance (PR)
electrical hazard resistance (EH)
slip resistance (SRO)

Sizes: 37–48. Shoe weight (size 42): approx. 625 g.

* Calculated weight does not include laces and insoles.