Giasco FLOW SB FO E PL CI WPA SR Safety Shoes

Giasco FLOW SB FO E PL CI WPA SR safety shoes are low safety shoes made of suede leather and anti-scratch WPA leather, 1.8–2.0 mm thick.
Lining made of breathable and abrasion-resistant material.
Soft, padded and coated tongue.

FOOTWEAR COMPLETELY FREE OF METAL PARTS

Protective cap made of polymer composite, non-metallic, with an impact resistance of 200 J, in accordance with EN 22568.

PL certified puncture-resistant dielectric composite midsole, in accordance with EN 22568.

The 3RUN three-density dielectric polyurethane sole, resistant to hydrocarbons and abrasion, absorbs shock and provides slip resistance.

Model 3R022E was tested using a method analogous to ASTM F2413-18 (EH) and CSA Z195-14 for electric shock resistance (voltage increase 1 kV/s to 20,000 V / 60 Hz, voltage retention for 1 minute), with a measured current of less than 1.0 mA.
The outer sole of the footwear, under defined conditions (in the absence of moisture and without taking into account the upper), has been tested using a method analogous to EN ISO 20345:2022 and shall provide electrical insulation up to a voltage of 1000 V (MΩ > 1000).
(Test Report No. 4314043.01/E)

Anti-torsion stabilizing insert in the sole for stability on uneven terrain.

Dielectric cartridge, additionally comfortable, dual-material with activated carbon, breathable, detachable, anatomically shaped, absorbent, antistatic, insulating and antibacterial.
Environmentally friendly product.

FO – Hydrocarbon-resistant outsole
E – energy absorption in the heel area
PL – puncture-resistant sole
CI – cold insulation down to −17 °C
SR – Slip-resistant outsole

This product meets the requirements of ASTM F2413-24:
– Impact resistance (I)
– Pressure resistance (C)
– Puncture resistance (PR)
– Electric shock resistance (EH)
– Slip resistance (SRO)

Sizes: 36–47
Shoe weight (size 42): approx. 550 g