Giasco VOLT SB FO E P HRO safety shoes

Giasco VOLT SB FO E P HRO safety shoes are low safety shoes made of suede leather with a thickness of 1.8–2.0 mm. The outer 3D material is breathable and resistant to abrasion. Soft, padded and coated tongue.

FOOTWEAR COMPLETELY FREE OF METAL PARTS

Polymer composite protective toe cap, non-metallic, 200 J impact resistance, in accordance with EN 22568.

PS flexible non-metallic composite midsole with insulating fabric, puncture-resistant, in accordance with EN 22568.

HARD ROCK INSULATING two-density sole made of polyurethane and insulating rubber, resistant to hydrocarbons and abrasion, shock absorbing and providing slip resistance.

Model HRD055H was tested using the method analogous to ASTM F2413-24 (EH) and CSA Z195-14 for electric shock resistance, with a voltage increase of 1 kV/s to 20,000 V / 60 Hz while maintaining voltage for 1 minute. The electric current remained below 1.0 mA.

The sole of the footwear, under defined conditions (in the absence of moisture, without reference to the upper), has been tested using a method analogous to EN ISO 20345:2022 and provides electrical insulation up to 1000 V (MΩ > 1000). (Test Report No. 4351088/E)

Dielectric cartridge, double-layer for extra comfort with activated carbon, breathable, detachable, anatomically shaped, absorbent, insulating and antibacterial.

Environmentally friendly product.

FO – hydrocarbon resistant sole. E – energy absorption in the heel area. PS – puncture resistance of the non-metallic midsole (nail Ø 3.0 mm). HRO – resistance of the sole to contact with high temperatures. SR – sole with slip resistance.

This product meets the requirements of the ASTM F2413-24 standard: impact resistance (I), pressure resistance (C), puncture resistance (PR), electrical hazard resistance (EH), slip resistance (SRO).

Sizes: 39–47. Shoe weight (size 42): approx. 590 g.

* Calculated weight does not include laces and insoles.